Anyone planning on going to the convention Jan 7-9? I'm going on the 8th.
Flyer is here
Anyone planning on going to the convention Jan 7-9? I'm going on the 8th.
Flyer is here
I am strongly considering it. There is also a computer show in an adjacent building there at the fairgrounds that I would also like to attend. I could 'kill two stones with one bird', so to speak. May see you there...I will be the one wandering around with a "gee, I really want that" look in my eyes.
John
LOL John. I'll be one with the walking sticking looking to find a seat where ever I am at.
A few of us are going... me and Peter E. for sure, possibly Mike C. and Tony dM., as well. I think Saturday is what we're working towards.
Hi-Tec Designs, LLC -- Owner (and self-proclaimed LED guru )
Trotec 80W Speedy 300 laser w/everything
CAMaster Stinger CNC (25" x 36" x 5")
USCutter 24" LaserPoint Vinyl Cutter
Jet JWBS-18QT-3 18", 3HP bandsaw
Robust Beauty 25"x52" wood lathe w/everything
Jet BD-920W 9"x20" metal lathe
Delta 18-900L 18" drill press
Flame Polisher (ooooh, FIRE!)
Freeware: InkScape, Paint.NET, DoubleCAD XT
Paidware: Wacom Intuos4 (Large), CorelDRAW X5
I'll be there on Friday.
David, where are you in Southern Maryland?
Larry, AKA Uncle Fester
I'm in Owings just outside of North Beach a few blocks.an't make it Friday I'll be @ work
To the Mods:
Thanks for moving this Thread. I did wonder if the WW forum was correct!
David,
Contact Peter Elliott and see what kind of a schedule he's putting together for us. As I said, I think Saturday is what we were shooting for (some of us have work on Friday), but I don't know any more details.
I'll add that there are a number of good coupons on the site you should print out... $2 off admission, free spouse admission, some freebies, and a number of $off coupons.
Hi-Tec Designs, LLC -- Owner (and self-proclaimed LED guru )
Trotec 80W Speedy 300 laser w/everything
CAMaster Stinger CNC (25" x 36" x 5")
USCutter 24" LaserPoint Vinyl Cutter
Jet JWBS-18QT-3 18", 3HP bandsaw
Robust Beauty 25"x52" wood lathe w/everything
Jet BD-920W 9"x20" metal lathe
Delta 18-900L 18" drill press
Flame Polisher (ooooh, FIRE!)
Freeware: InkScape, Paint.NET, DoubleCAD XT
Paidware: Wacom Intuos4 (Large), CorelDRAW X5
Okidokey !!!!!!
Hey Guys.. Mike Cruz and Tony D. are out.. Possible hooking up at the Chantilly show. Was thinking a breakfast meet? Good to get to the show early..but doesn't have to be at the gate opening. Dan works close to the show, so maybe he can suggest a place?
Update:
If anyone wants to meet for a quick breakfast - chat/chew prior to the show, we settled on a place/time. It's not a full breakfast but good place to get some "fuel" before the show.
Panera Bread
Dan is hooked on their Cinnamon Nut Muffin. Me, coffee and breakfast sandwiches are good.
Location - Just across from Maryland State Fairgrounds (click link for map)
2135 York Road
Timonium, MD 21093
Saturday - January 8th
Meet at 9am
Who is in?
Peter
Dan
??
??
Flyer is here (with Coupons!!!)
Don't forget to bring your tablesaw/miter (7" to 12") blade for free sharpening!
BigTen-Thumb3.jpg
Btw - there is a computer show going on as well. If your into that stuff (I need to get a cpu case)
Hi-Tec Designs, LLC -- Owner (and self-proclaimed LED guru )
Trotec 80W Speedy 300 laser w/everything
CAMaster Stinger CNC (25" x 36" x 5")
USCutter 24" LaserPoint Vinyl Cutter
Jet JWBS-18QT-3 18", 3HP bandsaw
Robust Beauty 25"x52" wood lathe w/everything
Jet BD-920W 9"x20" metal lathe
Delta 18-900L 18" drill press
Flame Polisher (ooooh, FIRE!)
Freeware: InkScape, Paint.NET, DoubleCAD XT
Paidware: Wacom Intuos4 (Large), CorelDRAW X5
Does this mean I have to dull one up to get the free sharpening? I always getting hosed on the free stuff LOL. See ya there.
Last edited by David Nelson1; 01-04-2011 at 2:12 PM.
I am definitely will be there on Saturday. Not sure if I get that early for morning gathering, but try. Always want to meet new people. May be we could plan for lunch time to get together?