ol’ wise & crafty SMC alumni, after 24 years of moderately hard use, my Dayton Speed-Aire finally died last night.
So... it’s time to start looking for a replacement!
Naturally my criteria is somewhat restricting…
- It has to be a good/high quality unit.
- It needs to be a horizontal unit with 20+ gallon capacity, I just don’t have the room for a large vertical compressor – it can’t be any taller than 42”
- It needs to be 110v so that limits it to about 2hp – 12hp if it’s a Craftsman but we don’t want to go there.
So what say ye, learned sages, I am open to all suggestions, I’m heading back to Kodiak next week , it would be nice to have it delivered before I get back.