I need your advice before opening up my new Timberwolf 93 1/2" resaw blade. I purchased this new resaw blade for my Grizzley 14" G0555X to use to resaw hardwood from Woodcraft. The folks at the Richmond, VA Woodcraft store could not advise me weather to buy this blade (3 tpi narrow kurf silicone low tension) in 3/4" or 1/2" so I opted for the 3/4" blade. Before I open the package, does anyone have any practical experience running a 3/4" resaw blade on this Grizzley saw"? Is the 1 1/2 hp motor on this saw big enough to drive this Timberwolf blade? This bandsaw is practically brand new and the tires are in new condition. Do I need to return this blade and exchange it for the same blade in 1/2"?