Page 1 of 2 12 LastLast
Results 1 to 15 of 23

Thread: question about coffee and glue filler

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    question about coffee and glue filler

    When you mix coffee and glue, do you use new coffee, or do you dry your used coffee

  2. #2
    Either one works fine. For as little as you use, I think it's easier to just use some fresh stuff rather that go to the trouble of drying out the used grinds.

  3. #3
    Join Date
    Sep 2009
    Location
    Enid, Oklahoma
    Posts
    6,741
    I hope the new grounds work better since I never acquired a taste for coffee... I'd hate to think that I had to brew it, throw out all the dirty water, and then dry the grounds just to get a void filled properly!

  4. #4
    Quote Originally Posted by David E Keller View Post
    ... I'd hate to think that I had to brew it, throw out all the dirty water, and then dry the grounds just to get a void filled properly!
    Keller, this is heresy!!!! The good Lord put coffee beans and chocolate here for pure pleasure!! Using the by-product for crack filler is just a bonus!

  5. #5
    Join Date
    Sep 2009
    Location
    Enid, Oklahoma
    Posts
    6,741
    Perhaps I have a double appreciation for chocolate... Besides, diet Coke is obviously a product of divine intervention(all the great caffeine with the added bonus of bubbles)!

  6. #6
    Join Date
    Aug 2007
    Location
    Dickinson, Texas
    Posts
    7,655
    Blog Entries
    1
    I'm with you John.


    My morning starts of grinding a nice Costa Rican dark roast and brewing it fresh. My other favorite is a Honduran normal roast.


  7. #7
    Quote Originally Posted by David E Keller View Post
    I hope the new grounds work better since I never acquired a taste for coffee... I'd hate to think that I had to brew it, throw out all the dirty water, and then dry the grounds just to get a void filled properly!
    I know what your problem is David...you never had any of that old military field coffee where you filter the grounds through a dirty sweat sock. Once you've had that, drinking coffee is a necessity of life that you'll never give up.
    Success is the sum of Failure and Learning

  8. #8
    Join Date
    Sep 2009
    Location
    Enid, Oklahoma
    Posts
    6,741
    Quote Originally Posted by Christopher K. Hartley View Post
    I know what your problem is David...you never had any of that old military field coffee where you filter the grounds through a dirty sweat sock. Once you've had that, drinking coffee is a necessity of life that you'll never give up.
    That's true, but I think it also has something to do with the coffee pots that got left on all over the hospital where I trained... You would have needed a spatula to scrape the black, tarry goo out of the pot and into a cup for consumption. Roofing tar actually appears nearly as potable as much of the coffee I saw fellow residents happily consume.

  9. #9
    Join Date
    Mar 2010
    Location
    Vestal, NY
    Posts
    908
    Quote Originally Posted by David E Keller View Post
    That's true, but I think it also has something to do with the coffee pots that got left on all over the hospital where I trained... You would have needed a spatula to scrape the black, tarry goo out of the pot and into a cup for consumption. Roofing tar actually appears nearly as potable as much of the coffee I saw fellow residents happily consume.
    bleah. David, I thought drinking pot after pot of coffee was a prerequisite for residency - it certainly seems to be for my profession!

  10. #10
    Join Date
    Jul 2008
    Location
    Atikokan, Rainy River district, Ontario
    Posts
    3,540
    It helps being Dutch , when my coffee grind is getting low I just pick the filter paper with the coffee grind in it and take it to the shop, set it down on a block and let it dry, when dry it goes into a small container for when I need it, easy and I do like to have the use of the ground coffee beforehand
    Have fun and take care

  11. #11
    Join Date
    Jan 2004
    Location
    Fredericksburg, TX
    Posts
    2,576
    I have used some instant coffee to add color to shavings and sanding dust. For some larger gaps, I have dampened the shavings/dust/coffee mix with DNA before mixing with 5 minute epoxy. It makes the mix a little thinner, but fills the gaps including small cracks and still finishes well with my oil/poly finish.

  12. #12
    All you need to know is revealed here:

    http://www.sawmillcreek.org/showthre...rs.&highlight=

    And, yes... you must use fresh coffee. Sacrifices must be made in the name of "high art"... Sorry!
    David DeCristoforo

  13. #13
    Join Date
    Sep 2009
    Location
    Enid, Oklahoma
    Posts
    6,741
    Quote Originally Posted by David DeCristoforo View Post
    One of my favorite SMC threads of all time... I was wrong not to defer to DD immediately with any coffee related concerns.

  14. #14
    "I was wrong not to defer to DD immediately with any coffee related concerns..."

    Indeed
    David DeCristoforo

  15. #15
    Join Date
    Jan 2004
    Location
    Lewiston, Idaho
    Posts
    28,576
    Quote Originally Posted by David DeCristoforo View Post
    All you need to know is revealed here:

    http://www.sawmillcreek.org/showthre...rs.&highlight=

    And, yes... you must use fresh coffee. Sacrifices must be made in the name of "high art"... Sorry!
    Ask me if I am surprised that a guy from California would suggest getting art "high".....
    Ken

    So much to learn, so little time.....

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •