I’m in the process of making a buffet for my wife and recently completed gluing up the top and sanding and trimming it to size. It is not as yet attached to the carcase as I have other things to do first. While moving it today I noticed a crack extending approximately 1 ½ inches from one end. The split is not at the glue line but is in the board itself. The top is made from 5/4 red oak jointed and planed to 1 inch. Having never done anything like this I am unsure how to make the repair and am looking for suggestions. Will it work to rip it at the split and re-glue it or should I rip it along each side of the split and re-glue or would a pocket screw from the back side along glue suffice? Thanks
Stan