Have been shopping for the best deal on a Unisaw, and found the best
deal at my local hardware store. They don't even handle table model
machines, but thought I should see if they could do me good on an order.
First their hardware wholesaler was told they couldn't get a unisaw because
it is industrial, so Judy gave me the number for Delta,866 299 9626, I talked
to Shelly Pope at Delta, and she said she could help, and said get the X5
promotion, with model 36831LA, and 50" rails 78-150 as that is their best deal. It is a left tilt with biesmeier, and I can just put the 30" rails aside.
Comes with a coupon for a mobile base. If the store waits till after Feb 20
to order it comes with free freight, as it is included in their spring Hardware
show order. Now I need to figure out which 8" jointer to get. They have the
37-380 for $950, no freight. Think thought that I would prefer the 37-350
with the extra long infeed table though, will have to call Shelly and see
what she can do on it. The table saw is $1500 freight included! JIm