Does anyone know where I can get one of these bits from?? been looking around without much success
Does anyone know where I can get one of these bits from?? been looking around without much success
Epilog Legend EXT 60w-Corel X4
Skype me .
There's a lot more good than evil,
and there's a lot more joy than pain.
"Yea, though I walk through the valley
of the shadow of death,
I will fear no evil:
for thou art with me;
thy rod and thy staff
they comfort me."
Can you provide a little more detail? It looks like a straight-cut, but that's all one can tell...
Hi-Tec Designs, LLC -- Owner (and self-proclaimed LED guru )
Trotec 80W Speedy 300 laser w/everything
CAMaster Stinger CNC (25" x 36" x 5")
USCutter 24" LaserPoint Vinyl Cutter
Jet JWBS-18QT-3 18", 3HP bandsaw
Robust Beauty 25"x52" wood lathe w/everything
Jet BD-920W 9"x20" metal lathe
Delta 18-900L 18" drill press
Flame Polisher (ooooh, FIRE!)
Freeware: InkScape, Paint.NET, DoubleCAD XT
Paidware: Wacom Intuos4 (Large), CorelDRAW X5
And shaft size? How long? But I will say, I've never seen a three-fluted one, so that's interesting.
All I know its attached on a Router with a 1/2" shank and has 3 Carbide Blades and is 2" in length, no branding on it
Epilog Legend EXT 60w-Corel X4
Skype me .
There's a lot more good than evil,
and there's a lot more joy than pain.
"Yea, though I walk through the valley
of the shadow of death,
I will fear no evil:
for thou art with me;
thy rod and thy staff
they comfort me."
Are you attempting to find an exact replacement, or do you simply want a 1/2" shaft, 2" long straight cutter... what is it, 3/4"? That's a simple enough find.
Hi-Tec Designs, LLC -- Owner (and self-proclaimed LED guru )
Trotec 80W Speedy 300 laser w/everything
CAMaster Stinger CNC (25" x 36" x 5")
USCutter 24" LaserPoint Vinyl Cutter
Jet JWBS-18QT-3 18", 3HP bandsaw
Robust Beauty 25"x52" wood lathe w/everything
Jet BD-920W 9"x20" metal lathe
Delta 18-900L 18" drill press
Flame Polisher (ooooh, FIRE!)
Freeware: InkScape, Paint.NET, DoubleCAD XT
Paidware: Wacom Intuos4 (Large), CorelDRAW X5
Just looking for a similar one with three-fluted Carbide blades not 2 which I see a lot of
Epilog Legend EXT 60w-Corel X4
Skype me .
There's a lot more good than evil,
and there's a lot more joy than pain.
"Yea, though I walk through the valley
of the shadow of death,
I will fear no evil:
for thou art with me;
thy rod and thy staff
they comfort me."
MLCS sells three fluted router bits
www.mlcswoodworking.com
They always offer free shipping too!
Thanks for the Heads up on that Keith
Epilog Legend EXT 60w-Corel X4
Skype me .
There's a lot more good than evil,
and there's a lot more joy than pain.
"Yea, though I walk through the valley
of the shadow of death,
I will fear no evil:
for thou art with me;
thy rod and thy staff
they comfort me."
Woodworkers Tool Works has three flute router bits in several sizes 800 475 9991.
If I told you who I was or what I did, I'd get kicked out of here....
(it's happened before...)
I have a 3 flute 1/2" shank, 3/4" diameter straight bit like that from MLCS. Works OK but, you have to set the depth from the "tallest" tooth as they are machined unevenly.
"A hen is only an egg's way of making another egg".
– Samuel Butler
Why do you want to stay with 3 flute?
If you want a superior finish, try a spiral bit.