Creates where shipped to the place i work at (in NY) from India.
Size of creates are roughly 5' long 2' deep and a foot and a half high, they also receive small box around 2' square of the same type of wood. If it matters, the creates housed electronics controls.
"Raw" create (filled with scraps of other creates which i broke up)
indian_create.jpg
Bottom runners (which a forklift would slide under, ran the left one through planer)
indian_create_bottom_runners.jpg
Practice segmented turning project (so you can see wood finished, only sanded).
DCP_1039.jpg
Practice segmented turning project (only sanded and paste waxed).
DCP_1033.jpg
Did some searching on line, but really did not find too many answers - only wood type which seamed to be common was Teak (maybe thats what the left "runner" is ?).
Can someone lead me in a direction ?
Thanks for any help.
_