Hi all
I have lots of 6" to 10" inch wide planks of ash to resaw (from 2" to 1" thick). I have about a total of 450 feet of resawing to do. On my current tawaineese bandsaw 1.5HP with a blade speed of 3500 sfpm, it will take a long long time.
I could get a real good deal on a general 390 (the 20" floor model) bandsaw with a 3hp motor and a blade speed of 4500 fpm.
I am wondering. How much faster I could resaw with the general bandsaw.
I am also wondering If I would gain in the quality of the cut As I cut my own veneer.
thanks Martin