Nice one Keith. Cant wait to seel your turnings in person.
Nice one Keith. Cant wait to seel your turnings in person.
-------
No, it's not thin enough yet.
-------
Bob- I, too, was curious about the finish. After doing a little search, I found this from Keith. Hope it helps you in the future.
Glenn
A couple have asked about my 10 minute finish so here it is.
1. Sand thru 400 to 600 grit. I power sand at high speed.
2. Rub in Minwax Antique Oil (Red Can). It may feel a little tacky but thats okay. Let set for a couple of minutes. Do not follow instructions on can.
3. Buff with tripoli followed by wax. I use the Beall System.
I am not a finishing expert and have no idea why this works or if it will work with other oils. Your results may vary. Works best on dense woods. Other woods may require a second or third application of the oil applied in the same rub in manner.
Thanks for all the kind words y'all ! Glenn, thanks for finding my previous post on the finish, I hope it helps. I am looking forward to meeting anyone here that is going to the symposium. So many here are going that I want to meet.
941.44 miles South of Steve Schlumph
TURN SAFE
Very pretty Keith. I am really looking forward to seeing this(and many others) in person!