Norris Style Adjusters

[John Dingman]

On another forum that I frequent many of the members had expressed interest in the Norris Adjuster. I have a friend that's a machinist and I had him make some up. If you are interested in getting one they are first come first serve as the supply is very limited. (only 5 left)


here it is:


They will come with a chip breaker screw that will fit perfectly in the adjuster to cut out all backlash. Also it comes with the screws to mount it to the plane. If you have a Hock Blade and chipbreaker they will fit perfectly. If not send the screw and I will have it sized to fit. However, the chipbreaker screw that comes with it should fit most chip breakers. If you are interested, let me know via pm as soon as possible. The cost is $50.00 shipped in the US.

Thanks,
John

[Pam Niedermayer]

That's a really good price, John, wish I needed some (I make Japanese planes).

Pam

[John Dingman]

Well Guys and Gals,

Thanks for the interest, they are all spoken for. I'll start getting them packaged up for shipment when Mr Green arrives I really do hope that this was a help!

Thanks again!
John