replacement 1 1/2" spokeshave blade

[jamie shard]

I've done a search for a 1.5" spokeshave blade (for a #65) and only turned up a kunz blade (traditionalwoodworker.com). Are there other options that I've missed? Has anybody ordered from traditional woodworker before?

[Jessica Pierce-LaRose]

If I'm remember right, the 65 shave just needs a channel or hole in the middle for the cap iron screw to pass through, right?

I've had a couple of Kunz spokeshaves in the past, and the blade just could never hold an edge. I'd be tempted to get one of Hock's 1 3/4" blades with the U shaped cut out and grind it narrower, or get on of their 1 1/2" "Krenov" style plane blades and grind it shorter.