Decided today (maybe not a good idea) to totally strip our epliog ext36 (75w). It was filthy dirty so need doing, we have pulled the laser tube and also stripped the collimator as all the optics in it where dirty. The bad new is it look like our tube is on its way out, it only gives 38 watts at 100% power 5000 pulse, and the beam is oval shapped so it needs to be refurbished. I really need to get it running again as i way have a job for it, so i am wondering if anyone has and alignment procedure and also the procedure for setting the collimator as it was taken apart and we are not 100% sure its back right. Cheers
Reply With Quote
