Curly Mango wrapped around a Rhodium w/ Black TI accent Romen Harvest Pen

[Chris Burgess]

Got this Curly Mango from Ron Fox, Thanks Ron, during the Pen swap a couple weeks ago. Hope you like. The pen itself is a good size. Used 33/64" & 31/64" bits for it. It is the largest pen I have turned to date but it is still not my fav as it seems light therfore I will stick with a Cigar as my pen of choice.

I would also like to thank Ron becasue getting his pen in really caused me to step up my game......

Finished with 25 Coats CA, Wet sand w/ 600 to size then finished to 12000MM, then Huts Ultra High Gloss Polish.

IMG_1464.jpgIMG_1465.jpg

C&C Please. Thanks for looking.

[Jim Burr]

Curly Mango is on my list...just found some in Ebay. Real nice work Chris...what are you using for your finish?

[Chris Burgess]

what are you using for your finish?

Thanks Jim. The finish was in there but I didnt specify. Going to edit my post.

25 Coats CA, Wet sand w/ 600 to size then finished to 12000MM, then Huts Ultra High Gloss Polish.

[Bernie Weishapl]

Really a great looking pen. That is some nice wood and great looking finish.

[Scott Hackler]

Nice pen Chris. I just roughed out a big blank of mango and that grain pattern of mango is really special. I saved the corners of the square blank for pens!

[Chris Burgess]

Thanks Guys. I really like this pen kit too. The Mango is amazing to work with. Scott if you have any you want to 'Throw Away' let me know, I will take it off your hands.

[Keith E Byrd]

Chris, that is very nice! That wood is awesome, finish great -and I like the kit - which kit is it?

[Chris Burgess]

Chris, that is very nice! That wood is awesome, finish great -and I like the kit - which kit is it?

Thanks Keith, It is a Roamn Harvest from Timberbits.com. If you are on IPS he has an add and a special for members.