Has anyone modified their machine in any unique way? Inside lighting? Webcam?
Has anyone modified their machine in any unique way? Inside lighting? Webcam?
Hey a cam inside or outside for that matter so you could watch it while you were doing design work on the puter would be neat. what would you need?
Al
40W MII W/Rotor
Camaster Stinger III, Vectric Aspire
Back up Vinyl cutter
Roland 54" print/cut
Laminator
Strip heater
Lasermaster 8.5, LXI Master Plus, Corel X4, Photograv, design shop pro
Knight DC16, DK3 Mug Press, Hix HD400D, GX7000
Embroidery
Hot stamping
I removed the bed and cut a hole in the bottom of the enclosure so I could fit taller items into the laser. I also cut an 8 inch diameter hole in the side of the enclosure so I can fit items longer then the width of the laser into the rotary. The simplest modification is to put magnets on the safety switches so you can leave the front door open so you can engrave longer items.
Universal M-300 (35 Watt CO2)
Universal X-660 (50 Watt CO2)
Hans (35 watt YAG)
Electrox Cobra (40 watt YAG)
Glass With Class, Cameron, Wisconsin
1 Inside lighting
I have fitted a small flourescent tube (as used under kitchen cabinets) under the lid and wired it to the mains on/off switch.
(Previously I used an Anglepoise lamp sat on the back of the machine, but it got knocked off once too often).
2 Vacuum hose hole in the front.
Having made my own vacuum table, I needed to get the vacuum hose into the machine.
A hole in the front panel with a swinging cover to seal it when the vacuum table is not in use.
Lighting...
Hi-Tec Designs, LLC -- Owner (and self-proclaimed LED guru )
Trotec 80W Speedy 300 laser w/everything
CAMaster Stinger CNC (25" x 36" x 5")
USCutter 24" LaserPoint Vinyl Cutter
Jet JWBS-18QT-3 18", 3HP bandsaw
Robust Beauty 25"x52" wood lathe w/everything
Jet BD-920W 9"x20" metal lathe
Delta 18-900L 18" drill press
Flame Polisher (ooooh, FIRE!)
Freeware: InkScape, Paint.NET, DoubleCAD XT
Paidware: Wacom Intuos4 (Large), CorelDRAW X5
While troubleshooting my power supply and tube a while back, I cut the wires that go from the power supply to the tube and installed connectors that allowed me to place a "Wattmeter" inline. I used some long leads and kept the Wattmeter just above the laser's control panel where it gave constant realtime readings of voltage and current. I originally bought the Wattmeter as an aide to selecting powerplants for electric RC aircraft.
I did this a while back, works awesomely !
http://www.sawmillcreek.org/showthre...ing&highlight=
Cut a 5.5" square hole on the left side, and fitted with a door so I could do Paddles and Bats, and ongoing lots of longer wood with logos and slogans for a well known coffee store's renovations..
Epilog 24TT(somewhere between 35-45 watts), CorelX4, Photograv(the old one, it works!), HotStamping, Pantograph, Vulcanizer, PolymerPlatemaker, Sandblasting Cabinet, and a 30 year collection of Assorted 'Junque'
Every time you make a typo, the errorists win
I Have to think outside the box.. I don't fit in it anymore
Experience is a wonderful thing.
It enables you to recognize a mistake when you make it again.
Every silver lining has a cloud around it
I designed an air intake to allows for outside air to be pulled in and vented out. Saves a lot on heating and cooling.
Grothouse Lumber Company
Andi Stratus Pro, ILS12.150, Solidworks 2012, AutoCad 2012, MasterCam X6, Coreldraw X6
Drilled three 3.5mm dia holes in the top-left-rear of my mini 18 so I could get to the red-dot adjusting screws whilst in-situ.
Epilog Mini 18 35W Laser
Heiz S720 CNC Router
Corel Graphic Suite X5
Vectric VCarve pro
I love deadlines. I like the whooshing sound they make as they fly by. — Douglas Adams