Does anybody make long torx drive bits?

[Ryan Baker]

Torx power drive bits are commonly available in 1" and 2" lengths. But I haven't been able to find anybody that carries longer ones (like 6"). Specifically, I am looking for T25 (and maybe some other sizes), and preferably rated for an impact driver. Philips and square drive are common, but not torx. Anybody have a source for them?

Thanks.

[Harry Simms]

http://www.quickscrews.com/Part/12239

[Ryan Baker]

Thanks for the link Harry!

[Ed Labadie]

Whia also offeres them.

http://wihatools.com/

FWIW, excellent products, except for their magnetic hex socket bits, the magnets are small & weak.

Ed

[Tom Walz]

Torx Power Bit, T25 x 152mm, Wiha 74589

http://www.carbideprocessors.com/wih...bit-t25x152mm/

[Kevin Groenke]

http://www.mcmaster.com/#standard-torx-screwdriver-bits/=ezskef

T25	2"	7396A24	1.98
T25	2 3/4"	7396A34	2.49
T25	3 1/2"	7396A44	3.04
T25	6"	7396A55	4.26

[Greg R Bradley]

Torx Power Bit, T25 x 152mm, Wiha 74589

http://www.carbideprocessors.com/wih...bit-t25x152mm/

I have several long Wiha Torx drivers and they are the best I've found.

Carbide Processors is one of the best vendors you will find.

[Ryan Baker]

Thanks for the responses. I was already thinking of Wiha (I like their products), but hadn't seen any around. I should have thought of carbide processors.