I have a 24'x24' pole building shop which I studded with 2x6's and insulated. Walls are covered with osb and I applied 2" styrofoam to the overhead doors. My problem is the high celings. I heat with a woodstove and it takes forever to get the shop warm as it must heat all that dead space overhead. The walls are 10' and the peak is probably 16'-17' high. There is only a thin layer of insulation rolled out underneath the delta metal roofing. I'm thinking of hanging a drop ceiling at the 10' level. I am unsure what to do with my lighting. I am ok with putting up some fluorescent fixtures but how do you suspend them? Any tips or suggestions on the whole project are welcomed.
Jerry