So how good is your dust collection system? The thought occurred to me while I was sweeping my floor. Does anyone have a DC system so good you don't need a floor sweep, or at least not need to sweep your floors? Seems to me that there are certain operations that just don't lend themselves to easily using a DC system at 100%. Sanding large objects if you don't have a vac attachment on your ROS. Ripping a thin edge on your TS where the edge of the blade is exposed. Ripping a strip too narrow to use your overhead blade guard with its dust port. Pretty much any hand operation. And lets face it, few dust shrouds catch 100% of the fine dust and chips. My shop is much cleaner than it used to be when I just had a single bag system with a 4" hose, but I still have to sweep. And I don't get sawdust fog anymore.