Hello to all you fellow cabinet makers / woodworkers, and small shop owners. I live in the great white north and have a small 2 man cabinet shop. Recently i started looking into adding a cnc router to my arsenal of machinery. For the beter part i've narrowed it down to pretty much 2 choices, shop sabre 4896, and the Camaster cobra x3. Would any of you fellows out there have any advise / experience concerning either of these 2 machines, pro's & cons?. I realize that the SS is ball & screw and the x3 is rp. , Other than that i think they're pretty close , i may be wrong, any info would be greatly appreciated, thx Ron , ps also which cabinet soft ware would u suggest.