Was up on the precisebits site and noticed that there is no longer any 1/8" collets available for the Bosch and Hitachi routers. What gives? were these defective? Kind of leaves you out in the cold as many of there bits are 1/8" shank.
Was up on the precisebits site and noticed that there is no longer any 1/8" collets available for the Bosch and Hitachi routers. What gives? were these defective? Kind of leaves you out in the cold as many of there bits are 1/8" shank.
There's a 1/8" collet listed here. 3rd one down. They're probably out of
http://www.precisebits.com/products/...h_1618_Collets
Gerry
JointCAM
We had just run out and pulled them from the site. We have more through QC now so they are back up.
Sorry for any inconvenience.
Please let me know if there is anything I can help with.
John Torrez
Think & Tinker / PreciseBits