If you'll bear with me, I'm pretty new to turning and have a lot of questions that have probably been asked quite a few times already. I've been reading about the various sharpening systems available for us folks that can't quite get the hang of freehand sharpening. With the wide variety of jigs and setups available, what is the better choice ... the wet-sytem Tormec or the Wolverine with a slow speed grinder (1750 rpm)? Is it a matter of personal preference, or is there really a major advantage for sharpening turning tools? I don't want to ruin any expensive tools, but I don't want to overkill it with an expensive system if it isn't necessary. Help ...