Just kidding! You don't have anything to worry about but these are my first two tea pots. They are made from Ambrosia Maple, 2 1/2 diam. x about 6" tall. The handle was made from 3 very thin strips, steamed, bent and glued together on a form. The spout was made from two pieces with a paper joint. The outside was cut and shaped. Then it was split and the inside was hollowed with a dremmel tool. C&C most welcome.
DSCF0769.JPGDSCF0771.JPGDSCF0779.JPGDSCF0767.JPG