hi all
I am seeking some objective information for the lapanese wheel from tormek (sj 250)
anyone out there have experience with it
thanks
Martin
hi all
I am seeking some objective information for the lapanese wheel from tormek (sj 250)
anyone out there have experience with it
thanks
Martin
Hi Martin,I have a Wheel that is yellow cant remember what grit was stamped on the side but it did say japan.So it was on my tormek for a short time.It was only good for polishing a edge.If i had two machine it would have been more useful to me.So now i keep it soaking in water.And use it as a big stone on its side.IT really cuts slow like a polishing stone.IT also has a lead center and needed alot of truing.Hope this helps Andrew