Hi all. Been watching these forums for a while. Specifically DC info. Just joined today.
I want to replace the flex hose on the floor with D2729 PVC, and aluminum tape at each joint, and minimal flex at drop near each tool. I have a Delta DC, used, good price, with 4” inlets, 1250 CFM per Delta. The longest horizontal run is under 15'. I changed the OEM fabric filter bag with a much larger 1 micron bag from American Filter Fabricators. I plan to build the Thien Separator Lid and Phil Bumbalough Blast Gates. Also built a unit to filter dust in the air.
My questions are:
- Am I on track with what I have planed for DC?
- Thought I had seen how to connect 4” flex hose or 4” flex connector to the D2729 PVC somewhere on this forum. I cannot relocate it. Can someone help here?
- How do I connect Phil's blast gates to each between PVC drop and flex hose?
- Thought I read where Phil was going to post pics of a jig he made to assist with making the BG's. Can anyone direct me to those pics?
Sorry if this is to much all at once.
Thanks