Since I'm learning to cast items to turn its been a whole new expierence around here. Cracks,voids and inperfections are not a problem anymore. I'm looking for wood or other items that need a little more addition to make it a masterpiece. These are some of the items I've worked on this weekend. There is a learning curve but other than that its a blast to do.One is a Jr. Gent pen that was in 2 pieces when I started. It's a Spalted Oak burl that was casted in blue "Poly Resin" using a pressure pot. The second pen is an Aero pen wrapped in yellow Poly Resin using some "Sweetgum" balls I picked up off the ground on Friday. These pens are sure to be an eyecatcher. C&C Welcome.