I am looking for a finished wood (preferred) stand with 2 holes or no holes in it 3/4" to 1" thick and 2" x 12" aprox. It needs to be low cost. I have looked at the basic trophy stores they have the bases but all drilled with 3 or more holes.
I am looking for a finished wood (preferred) stand with 2 holes or no holes in it 3/4" to 1" thick and 2" x 12" aprox. It needs to be low cost. I have looked at the basic trophy stores they have the bases but all drilled with 3 or more holes.
Craig Matheny
Anaheim, Ca
45 watt Epilog Laser, 60 watt Epilog Laser,
Plasma Cutter, MiG Welder
Rikon 70-100 Lathe
Shop Smith V510, To many hand Tools and
Universal Repair Kit (1- Hammer and 1- Roll of Duck Tape)
Contact this company .www.moslowbros.com They may do custom orders.
Tom Sieczkarek
Cutting Light Custom Laser Engraving
Epilog Helix -60 watts
Sandblasting Cabinet
Various wood working equipment
they do custom hardwoods
http://www.kasdorfmfg.com/
they do custom pressboard
http://blueridgewoodcrafts.com/
Last edited by Mark Sipes; 03-04-2012 at 8:16 PM.
Mark
In the Great Northwest!
Trotec Speedy C25, Newing-Hall 350 (AMC I & HPGL), NH-CG-30 (Carbide Cutter Sharpener)
Sawgrass 400 Gel Ink Printer, CS5, 5/9/x6 CorelDraw
Thanks for your help
Craig Matheny
Anaheim, Ca
45 watt Epilog Laser, 60 watt Epilog Laser,
Plasma Cutter, MiG Welder
Rikon 70-100 Lathe
Shop Smith V510, To many hand Tools and
Universal Repair Kit (1- Hammer and 1- Roll of Duck Tape)