Replacing Router Bearings Porter Cable 7539

[Doug Keener]

I need to replace the bearings in my 14 year old 7539 router. When I look at the collet end there are three screws in a plate that appear to be what holds the bearing. How do you take off the main collet so that the bearing retainer plate can be removed. The schematic I have doesn't show whether it is threaded on or what????

Thanks Doug

[Thomas Hotchkin]

Doug
Take a look at this post from 2010 http://www.sawmillcreek.org/showthre...e+7539+bearing Tom

[Doug Keener]

Hi Tom

Thanks for the thread. I have the new bearings in it and it sounds beautiful!!! Good for another 14 years (I hope)!!

Doug

[Thomas Hotchkin]

Doug
You are welcome, glad it worked out for you. Tom