I've heard people use hot glue to attach sacraficial blocks. I just bought a hot glue gun and am wondering if there is a difference in the glue sticks. If so which one's should I use. Thanks for the help.
I've heard people use hot glue to attach sacraficial blocks. I just bought a hot glue gun and am wondering if there is a difference in the glue sticks. If so which one's should I use. Thanks for the help.
Matt Newton
IAFF Local 2664
non illigitimi carborundum
the glue stick package may have this information on the package, I will recommended a heavy duty or severe duty glue stick
if you are going to shape the blocks, you need something to hold it so the glue can hold it, 2 #8 screws then hot glue the edges works for me on multi-axis piecesI've heard people use hot glue to attach sacraficial blocks.
I use the standard sticks that are right beside the glue guns at Lowes. I would guess that any brand you buy at a big box or hardware store would be fine assuming you have a gun that can get hot enough.
As far as the process goes, I use a hardwood glue block on just about every project I turn and the glue has held without fail countless times. The most important aspects are getting the glue nice a hot and making sure the two surfaces you're joining together are flat so the maximum amount of surface area can make contact.
Hot melt glue can be a good choice but as with most mounting techniques there is a learning curve. Until you are comfortable that your hot melt glue method is effective for your style of woodturning you might develop a "test" protocol. This could be as simple as whacking the blank with a hammer to "test" the secureness of the hot melt glue. Some woods are a bit oily and hot melt glue could be a problem.
The Large print givithand the fine print takith away
There are bowl blanks and bowl blanks. are we talking about a 3# small piece or a 35# green long blank. i personally would not trust hot glue on a heavy piece and never on wet-green wood. the devil's in the details.---good luck------Old forester