Hello All,

I just received the subject blade from a fellow Creeker. In the process of buying the blade I did not look at the final picture in the classified post which indicated the blade was thin kerf. I've hesitated to buy a thin kerf blade due to reports of vibration/chatter/stability.

I'll experiment for myself but I'm curious on the general opinion of the WWII TK in particular. For reference I will be using it in my Jet Pro-Shop 10" hybrid. I can certainly see the advantage of the reduced cutting resistance in that I do work with thicker stock and the 1.75 HP has shown it's limitations with my full kerf blades. Your feedback is much appreciated.

Thanks!
Charlie