I haven't been around here much for quite a while, but have been checking in lately. Most of my time is spent on another board, but I'm trying to catch up over here a bit.
My most recently completed project is an item I spent a few weeks designing last Summer and started in September. I finally got it done the middle of March and thought I'd post the finished product here for your comments.
The primary wood is Honduran mahogany. The door panels (and two end panels not visible in the photo) are sapele pommelle veneer. The door rails, top and bottom aprons and panels for the door veneer were formed using my vacuum press and a bending form. Overall size is about 74.5" long by 25" high by 22" deep in the center.
Credenza_a.jpg
This photo shows the top panel a bit better. It comprises a central area of olive ash burl veneer; each end is a sunburst of cherry with a wenge border. The frame of the top is solid mahogany.
Credenza_c.jpg
This project started life as a TV stand. When LOML suggested using the olive ash veneer for the top, we quickly decided to order a wall-mount for the 55" LG TV.
Thanks for looking!