I've noticed that with a new blade on my 18" Grizzly machine (Green and probably late 90's model) I can resaw decently. I have a Kreg fence I bought for this thing a while back. But... once the blade starts to dull a bit, resawing becomes guesswork as to if it will work or not. I wonder if this is the reason Mark Duginske uses that curved Kreg resaw fence that you can kind of steer the cut. All I know is that I don't like guessing when I'm cutting up expensive wood. I like to be able to trust my machine. I'd really like to get a better bandsaw eventually. I'm sure that would also boost resawing confidence but I'd probably still be up against dull blades and curving correct? Would this thing eliminate most of this problem? http://www.woodcraft.com/Product/200...saw-Guide.aspx