Looking for jewelry box handles or knobs

[Craig D Peltier]

Hello I built a small jewelry box, daws are 1.25 to 1.75 tall so I'm looking for some small pulls. I have looked at rocker, wood craft and van dykes so far. Anyone tell me where there's some to look at online?

Thanks

[Sam Murdoch]

Here is one of my favorite hardware companies. The link I am attaching shows knobs as small as 1/4" http://www.whitechapel-ltd.com/category/CABcode4.html, but while you are there - look through the catalog - some very great and some unusual hardware mixed in with the more expected.

[Ken Fitzgerald]

I ordered some from here: http://www.leevalley.com/us/hardware...=3,46742,44005

[dan grant]

build your own, check out fww

[Brian Kerley]

Hardware is always tricky. Cheap hardware looks, well...cheap.

Brusso is always amazing stuff when it comes to hinges and such, but it's not cheap.

For knobs, Lee Valley has quite a selection, but I also like Horton Brasses. Check out these knobs:
http://www.horton-brasses.com/store/knobs/deskinterior

They come in a bunch of different finishes and sizes, and the quality is quite good.

Lee Valley makes these insert knobs in as small as 3/8
http://www.leevalley.com/en/hardware...742,44007&ap=1

And here are another set of smaller knobs
http://www.leevalley.com/en/hardware...005,50468&ap=1


Good luck!

[Craig D Peltier]

Thanks I have the Lee Valley hardware catalog and it seems this will suffice. I dont want to make my own so theres more wood on the box, want to soften it a bit for mom.

Thanks for the info and links I saved.