I saw one of these at my local Woodcraft and decided to make one with the CNC.
This one is cut from a 2" cube of Foam. I have made them from wood and plastic.
I saw one of these at my local Woodcraft and decided to make one with the CNC.
This one is cut from a 2" cube of Foam. I have made them from wood and plastic.
Very nice video! Did you buy the dust shoe and from who? I'd like information on your table top.
Thanks!
Ed
Its all my design. I was making and handing these out at the US Science and Engineering Festaval. It was a two day event. We had over 150,000 people on the first day alone.
I was making these out of 2" Owens Corning insulation because I was handing them out and the material is cheap. Also the kids cant hurt anyone with them.
I was able to take my smallest KRMx02 and made things for the kids. Just about everything in my booths were made on one of my CNC's. Even the battle bots.
Last edited by Michael Simpson Virgina; 05-03-2012 at 1:44 AM.
Here are some other examples of the "turners cube"
http://cnccookbook.com/CCTurnersCube.html