I have two sets of turning tools with a similar makeup within each set, gouges, parting tools, skews, etc. I really don't know which set is of higher quality, preferred among turners, or a better set in general.
First, the Robert Sorby set, somewhat older with long uniform handles. The second set is Henry Taylor high speed steelP1010002c.jpgP1010003c.jpg I don't think the Sorby tools are high speed steel but the Henry Taylor tools are. As you can see, the Taylor chisels are of different length handles though I believe they are a matching set.
My turning abilities are intermediate and I don't turn many bowls or hollow vessels. Mostly handles, knobs, pens, and small decorative items.
Any help is appreciated, I will only keep one of these sets and will be selling the other.
Jeff