Here are pics of my second hollow form. Hollowed with a monster articulating arm. It is a maple burl with an african blackwood finial. Hollowed thru a 1" diameter hole.Hd a little trouble getting it hollowed around the hole, until I put the slight raise around the hole. I think it actually improved the look. 5" diameter, 4 1/4" high, 8" overall height with the finial. 4 coats of spray can lacquer finish, then buffed. Used Mylands friction polish on the finial. Someday I hope to get a photo tent to improve my pictures.
All critiques and comments welcomed. If I don't here what I need to improve on, I can't improve.