3 year old saw--tire starts coming out of groove---upper wheel---anyone have this problem before,if so how did you fix it---thinking of using polurethane tire if its tire fault----tks,joe
3 year old saw--tire starts coming out of groove---upper wheel---anyone have this problem before,if so how did you fix it---thinking of using polurethane tire if its tire fault----tks,joe
Uh! It is urethane tire. Polyurethane is a "finish".
I the tire glued/not glued? Tension issue for the blade? What blade? Is the original tire a rubber tire?
Gotta give us some info before we can help.
Not tyin' to be a smart. Just want to know details.
Bill
Last edited by Bruce Page; 08-04-2012 at 3:45 PM.
On the other hand, I still have five fingers.
I don’t think tension on the blade is an issue here. It must be on the tires. But Bill’s right. You need to be a little more specific, Joe.
Joe -
I'd check with Rikon CS. Rikon machines come with a 5 year warranty so they likely will fix the problem for you. From what is reported on the various WW forums Rikon CS is fairly good. I have a Rikon 18" band saw that's 1 1/2 years old and I haven't had a bit of trouble with it, so I have no personal experience with their CS.
My Rikon 18" is about 6 years old and has the same tires on it. I have always thought the tires were glued on, they don't lift.