I need feedback from people that have either owned or used the shopfox G9220 or the biesemer bc50 fence system. I am going to have to buy a fence next month for my delta rockwell 12/14 inch table saw and right now money is tight but I am looking for input to see if the ~100 dollar difference is worth 100 bucks.
I have adjusted the fence that came with this saw, which is the original, and I just cant get it adjusted so that the lock down will work properly. If I get it to lock down then I cant move the fence, if I get it loose enough to move then it wont lock down. go figure.
any help appreciated.
so far I have looked at the shopfox, bc50 and the vega pro 50L.