I need to make a moulding plane for a project I am working on.
I have found that you can not use scratch stock across grain with much if any success.
Does anyone have any ideas about where to get an of how to make a moulding plane?
Thanks,
Dale
I need to make a moulding plane for a project I am working on.
I have found that you can not use scratch stock across grain with much if any success.
Does anyone have any ideas about where to get an of how to make a moulding plane?
Thanks,
Dale
Dale,
You won't go wrong with the DVDs:
Making Traditional Side Escapement Planes
by Larry Williams
or, for the blades:
Sharpening Profiled Hand Tools
by Larry Williams
sold at LN and other fine woodworking sites.
One can never have too many planes and chisels... or so I'm learning!!
Also, the Todd Herrli dvd is excellent.
Thanks guys.
I just ordered Larry Williams DVD.
Thanks again.
In going across the grain it helps if the plane has a knicker or what worked better for me was to score the edge with a knife before cutting.
It also helps to do your cross grain cuts before doing the cuts with the grain. This will help to clear away any of the blown out grain.
I have a few hollows and rounds that are getting a lot of use. One day I hope to get at least a half set of hollows and rounds. Some of my molding work has been done with a Stanley 45 or 55. They are not as versatile as a wood bodied "molding" plane.
I use my rounding planes a lot for shaping edges and such.
jtk
"A pessimist sees the difficulty in every opportunity; an optimist sees the opportunity in every difficulty."
- Sir Winston Churchill (1874-1965)
Jim,
I can feel myself slipping and sliding down the slippery slope now.
I said to myself, self no moulding planes.
First just one for this project then another for the next then soon a bunch.
Good grief will it every end?
Dale,
I remember a similar conversation with myself.
No, I was convinced I'd never touch/need inlay tools and what did I buy two weeks ago?
Trevor Walsh
TWDesignShop
No, it won't. Make yourself a half set of hollows and rounds, and a good rebate plane, and you will be able to replicate a short run of (almost) any profile you could want. I say almost because, while I can't think of a profile I can't make with them, nothing is absolute in this world.
Grease the slope, and take a running start before diving head first. It's more fun that way.
Jeff
Jeff,
May be that is what I should do. Start making hollows and rounds. Hmmmm.
I think I could make the profile I want from them.
Great idea and I would not have to make a lot of different profiles for each project.
Problem mostly solved.
Start making hollows and rounds.... as soon as I learn to make them. Still waiting video.
Need to Google rebate plane to see what that is.
Thanks guys.