Results 1 to 6 of 6

Thread: Joe Graham Inspired Chair

  1. #1
    Join Date
    Jul 2006
    Location
    DuBois,Pa
    Posts
    1,557

    Joe Graham Inspired Chair

    I took a class from Joe in june and made a beautiful continuous arm Windsor rocking chair. This was my first attempt at home part his part mine design. Cherry seat and back the rest is red oak. I still need final sanding and finishing. I learned a lot from this chair and how to make improvements on the next. If you never made a chair Joe is a great instructor I had a great time.

    BobCHAIR1.JPGCHAIR2.JPG

  2. #2
    Join Date
    Nov 2007
    Location
    olmsted falls,ohio
    Posts
    490
    nice job bob.whats the finish going to be.

  3. #3
    Join Date
    Jan 2010
    Location
    Lafayette, Indiana
    Posts
    1,379
    Wow! What an interesting, eye catching piece. I am looking forward to seeing it finished. Nice work.

  4. #4
    Join Date
    Jul 2006
    Location
    DuBois,Pa
    Posts
    1,557
    Thanks,
    I am going to use a dark dye to tie the woods together and sunburst the seat. Then some wiping varnish.

    Bob

  5. #5
    Join Date
    Dec 2004
    Location
    St. Louis
    Posts
    3,349
    I like it!
    Where did I put that tape measure...

  6. #6
    Join Date
    Jul 2006
    Location
    DuBois,Pa
    Posts
    1,557
    I finally got the dye and many coats of seal a cell on buffed with steel wool and wax.

    Bob
    Attached Images Attached Images

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •