I have a molding that I would like to recreate for a Spice Box project. I have attached a picture of the molding I want to duplicate..or at least come close to. The photo of the molding is lousy, but you can see the outline of the shape in pencil. The cove I could do on a machine. The other is not a true radius but flattens as it reaches the top of the molding. How can I do this? I have thought of creating the 1/2" cove on a router table and then make a scraper and put it in a block for a guide registered to the cove to reproduce the remaining curve. A second possibility, I have a molding plane that I could try to modify to do that task as well. I am not sure how I would proceed with the second idea. Any suggestions on how to proceed would be appreciated. Jim