Anyone know of someone with a portable saw mill? I still need to decide what to do with all that logs that will be cut in the next few weeks on my property. Thanks
Anyone know of someone with a portable saw mill? I still need to decide what to do with all that logs that will be cut in the next few weeks on my property. Thanks
Scott C. in KC
Befco Designs
Scott,
There is a member over at woodnet that doesn't have a portable one, but he has taken logs to a mill. He uses a trailer and such. Would you like me to check with him on who cuts and drys his lumber?
If you would not mind. Ideally I would like to find someone to come onsite to mill up, but that is an option.
Scott C. in KC
Befco Designs
Go to the Woodmizer site...I believe they have listings for sawyers there. That's how I found "my guy" back in 2000!
--
The most expensive tool is the one you buy "cheaply" and often...
Scott,
Let me know when you are going to take these trees down and I will be glad to help.
PM me and we can talk more about this.
Randy
Randy
Don't worry abuot tommorrow, it may never arrive
Don't fret over yesterdays mistake, you can't undo them
Just live today the best you can.
There are several mizer owners up there. My old Lt-30 is up at Sibley. Sold it to my brother-in-law. Don't know if He would have the time. He is busy with concrete season now. I can give you his phone # if you want.
Steve
Scott,
I think my brother-in-law has a good contact on this....
I'll get back with you soon!!!
Scott there is a sawer that goes out to the peoples places. His name is
Ron Collins at 816 779-4662. He does a good job and has a Timber King
mill so he can cut large logs.
Lester
Thanks for all the good replies. I will try and follow up on them this weekend. I have to head to Las Vegas tomorrow and will be out of pocket. I know the GC wants to clear out some trees early next week to make room for a clear survey. I hope to be there when it is doen to have them move the ones I want to the side. Still not sure of the wood yet. I thought they were oaks, but now that the trees are starting to bud, they are not. I am trying to figure that out as well, since it may be crap wood.
When I do begin to clear out. I know there will be lots of wood for any local turnings. I would gladly share as much of it as possible.
Scott C. in KC
Befco Designs
let me know about the turning wood, I always need some of that.