These are a couple of saws I finished up a couple of days ago. The first is a 10" dovetail saw with a 2" depth of cut. The handle is apple, and is extra large. The blade is 0.015" thick spring steel.
apple-10in-dt-01.jpg apple-10in-dt-02.jpg
The second is a 12" carcase saw with a 3" depth of cut. The handle is quartersawn walnut. The blade on this one is 0.025" thick spring steel. Oh, it's also left-handed.
walnut-carcase-left-01.jpg walnut-carcase-left-02.jpg
Any questions, comments or critiques are welcome.