Is PhotoVcarve to the CNC as Photograve is to the laser? If you have Aspire do you still need PhotoVcarve?
Is PhotoVcarve to the CNC as Photograve is to the laser? If you have Aspire do you still need PhotoVcarve?
God Bless,
James & Zelma (Psalm 18:2)
"Inscriptions Of The Heart"
Texas
~A person is only as good as their word~
Your analogy is correct, but just like with Lasers, you don't need Photograve to engrave pics with a laser. The short answer is, if you have Aspire you pretty much have everything you need, other than being able to do lithophanes.. But look at the comparison chart:
http://www.vectric.com/WebSite/Vectr...omparision.htm
Ernie Martinez
Ocala Florida
Epilog Mini 24 50W
Windows 7 Corel X6, PhotoLaser +v9
Laguna IQ CNC Router
Vectric Vcarve Pro
Smithy Granite 1324 Mill/Drill/Lathe
Grizzly GO621X Bandsaw
With Aspire you can do lithophanes but not photo line engraving
Yep, my mistake.
Ernie Martinez
Ocala Florida
Epilog Mini 24 50W
Windows 7 Corel X6, PhotoLaser +v9
Laguna IQ CNC Router
Vectric Vcarve Pro
Smithy Granite 1324 Mill/Drill/Lathe
Grizzly GO621X Bandsaw
Lithophanes are awesome with photovcarve though!!
Glad its my shop I am responsible for - I only have to make me happy.