Oyster Knife Blades

[Joe Sahli]

Anyone know a source for Oyster knife parts? I'd like to turn the handles but buy the blades to insert. My internet searches are coming up empty. Thanks.

[Doug Herzberg]

Sometimes, you can find cutlery in thrift stores and remove the existing handles. Not sure how often oyster knives would show up there. Maybe a restaurant supply store? It's amazing how inexpensive things can be there.

[Steve Schlumpf]

Joe - depending on where you live, you may be able to pick up some knives locally and use those blades like Doug suggests. I know when I worked commercial fishing there was a supply house for all the tools needed for oysters, crab and shrimping.

This is the only knife vendor I could locate on the web that may carry what you are looking for. Good luck!

[Eric Holmquist]

Last time I visited the marine supply store in Galilee RI, the oyster knives were fairly cheap, just a few dollars each. There was a laundry basket full of them. Like mentioned earlier, you could remove the stock rubber handles and make your own.

[Jay Jolliffe]

Try this....You'll have to remove the handle. http://www.rmurphyknives.com/store/oyster-knives.html