Got an early Christmas present today when a good friend sent me a remote control for my DVR XP .
I installed it per the directions, but when I plugged the lathe back in it woudn't power up. Opened it back up and checked all the connections, they were good, plugged it back in and still nothing. I thought maybe the remote control board was bad, so I removed it and put everything back to their original positions. Plugged it back in and still nothing. Each time I tried to power it up I could hear some clicking coming from the control panel or headstock (hard to pinpoint the exact location). I unplugged it again to do another double check on the connections, and the ground prong broke out of the plug.
I sent an email to Teknatool to see if they have any idea what the problem is, but in the meantime, has anyone else experienced anything like this with their DVR?
It's only been a few hours, but I'm already feeling the withdrawl symptoms setting in .
2012-12-19_19-10-57_465.jpg2012-12-19_19-01-36_349.jpg