numbers on these bearings are UGC3C and thk ssr154.4. can't find them anywhere. two of mine just imploded on the spindle head side of the gantry rails. too much weight for too long i suppose.
numbers on these bearings are UGC3C and thk ssr154.4. can't find them anywhere. two of mine just imploded on the spindle head side of the gantry rails. too much weight for too long i suppose.
http://www.motionindustries.com/moti.../bearings.html
Take the bearing to these guys. Where are you located . . ?
Support the "CREEK" . . .
Equipment: IS400, IS6000, VLS 6.60, LS100, HP4550, Ricoh GX e3300n, Hotronix STX20
Software: Adobe Suite & Gravostyle 5
Business: Trophy, Awards and Engraving
Thanks for the beta. Was able to get it figured out, and more, with the help. Leading edge bearings blew out and shopsabre, after getting back to me, told me they no longer make machines with the 8" base width on the rails. They went to 12 or 16" in part because they were getting this problem. for what its worth.