This is link to manufacturer they may be able to help you.
http://www.decospan.com/en/Products/Decoflex/
Mohammed,
Try these suppliers located in Ontario........
www dot amwoodinc dot com
www dot exotic-woods dot com
Trotec Speedy 300 - 60w, with Quatro CSA-626 fume extraction
Xenetech 1625 x2,
New Hermes TX pantograph, CG4 cutter grinder
Brady Globalmark2 label printer,
Assortment of custom tooling , shears & punches, heat bender.
Software: Xenetech XOT, Corel X3, Bartender label software
The Michael's in Winnipeg stocks the Midwest product but it seems pricey on the web - not sure what I paid. I was actually using 1/64 (.016" or .4mm). You don't really need to go up to 1/32" thickness as the 1/64" is surprisingly durable. It is 3 layers of .005 veneer.
Search on <1/64" birch plywood> or <.4mm birch plywood> and maybe you will find something suitable.
hey Richard,
i just went to the michael's website. and the word plywood doesnt even exist on their system.
it might be according to the area we live in? i dont know.
can you share a link if you can still see them?
thanks,
mohammed
I would suggest that you use cherry instead of maple. Cherry will "char" darker than maple. I also like walnut, it looks like a more expensive product.
Yes, as I mentioned earlier, I could not find it either, on the US or Canadian websites. So I'm sorry, I can't link to Michael's. You might find the Midwest plywood (www.midwestproducts.com) at your local Michael's or hobby shop but you might be paying $15-25 for a 12"x24" sheet. You might need to shop around for a better price. If you can use smaller sheets, the shipping will be cheaper but there might be a bit more waste.
I would also consider red alder. Here is a link to some I made for a customer of mine, he's also the person who designed my website. They are red alder with a walnut inlay, the walnut is flush with the back and is raised on the front - a very rich looking business card!
http://www.nwlaserimage.com/wp-conte...ja-bc-wood.jpg
Gary
Mohammed, have you contacted suppliers I posted?
These two are located in Ontario......
www dot amwoodinc dot com
www dot exotic-woods dot com
Here is Michigan based supplier that ships to canada........www.oakwoodveneer.com
Trotec Speedy 300 - 60w, with Quatro CSA-626 fume extraction
Xenetech 1625 x2,
New Hermes TX pantograph, CG4 cutter grinder
Brady Globalmark2 label printer,
Assortment of custom tooling , shears & punches, heat bender.
Software: Xenetech XOT, Corel X3, Bartender label software