an old electric guitar body cut

[stan kern]

Using white ash i cut out an old modified electric guitar design used 2 bits from from FStools in Markham, ON Canada
and the bits were:
RSF2061W-UD2
RSF2058M-UD2
Everything went fine and i even did the guitar back.Its still in a rough format needs sanding ,shaping and the back needs to be shaped for a body fit
Might even add some lasered graphics to the body. I mocked it up with a black pic guard to see if everything lined up.

http://youtu.be/u3j4geAqAoQ