Lathes: Nova DVR XP, Delta 46-460, Jet 1014vsi; Bader III 2"x72" belt grinder; Triton 2.25 router; CMT Industrio table; Jointech fence; SC planer; Dewalt miter; Delta 14" bandsaw; Festool TS55, MFT/3, CT22, ETS150/3, OF1400, PSB300EQ, CXS; Hegner Scrollsaw; JJ-6CS jointer; Grizzly 1023s cabinetsaw, Jet 17" drill press; Rigid OSS; 9" SandFlee; 3M AirStream & Breathe Easy PAPRs
Bill, we're having great fun experimenting with many tools and techniques... brass inlay, polymer clay, precious metal clay, dyes, inlace, wood inlaying, semi precious stones, airbrushing, piercing, etc.
We are thinking of these pendants as canvases on which to play...
Last edited by Alan Zenreich; 03-24-2013 at 10:26 PM.
Lathes: Nova DVR XP, Delta 46-460, Jet 1014vsi; Bader III 2"x72" belt grinder; Triton 2.25 router; CMT Industrio table; Jointech fence; SC planer; Dewalt miter; Delta 14" bandsaw; Festool TS55, MFT/3, CT22, ETS150/3, OF1400, PSB300EQ, CXS; Hegner Scrollsaw; JJ-6CS jointer; Grizzly 1023s cabinetsaw, Jet 17" drill press; Rigid OSS; 9" SandFlee; 3M AirStream & Breathe Easy PAPRs
Lathes: Nova DVR XP, Delta 46-460, Jet 1014vsi; Bader III 2"x72" belt grinder; Triton 2.25 router; CMT Industrio table; Jointech fence; SC planer; Dewalt miter; Delta 14" bandsaw; Festool TS55, MFT/3, CT22, ETS150/3, OF1400, PSB300EQ, CXS; Hegner Scrollsaw; JJ-6CS jointer; Grizzly 1023s cabinetsaw, Jet 17" drill press; Rigid OSS; 9" SandFlee; 3M AirStream & Breathe Easy PAPRs
Thanks one and all for the kind words. We really are having a good time making these pendants, and sharing the techniques and toys, cough, errrr.... tools used to produce them.
Lathes: Nova DVR XP, Delta 46-460, Jet 1014vsi; Bader III 2"x72" belt grinder; Triton 2.25 router; CMT Industrio table; Jointech fence; SC planer; Dewalt miter; Delta 14" bandsaw; Festool TS55, MFT/3, CT22, ETS150/3, OF1400, PSB300EQ, CXS; Hegner Scrollsaw; JJ-6CS jointer; Grizzly 1023s cabinetsaw, Jet 17" drill press; Rigid OSS; 9" SandFlee; 3M AirStream & Breathe Easy PAPRs
Alan wrote:
Alan, great little tutorial! Very creative work. Thanks!David,
This was a turning project, all done on the lathe, no carving. Here are a couple of photos that might give some insight into how it was made.
[snip]
David