Would sure appreciate some recommendations.
I've used Simple Green and sometimes Goo-Gone. They seem to work well if I get some build-up of pitch from soft woods.
Other options for cleaners or techniques? Thanks.
Kev
Would sure appreciate some recommendations.
I've used Simple Green and sometimes Goo-Gone. They seem to work well if I get some build-up of pitch from soft woods.
Other options for cleaners or techniques? Thanks.
Kev
Arm & Hammer WASHING SODA, not baking soda. Mix it with warm water. 1/4 cup in a quart of water. Doesn't take much.
Use it for saw blades, router bits (take the bearings off), forstner bits. Stuff is inexpensive, biodegradeable, rinse it down the drain.
Give it a try.
Bill
On the other hand, I still have five fingers.